Categories: Construction Preparing the Construction Accident Case TASA ID: On April 24, 2012, at 2 p.m. ET, The TASA Group, Inc., in conjunction with construction safety expert Dan Paine, presented a free, interactive, one-hour webinar, Preparing the Construction Accident Case, for all legal professionals.During this program, the presenter covered the following: Definitions: OSHA & ANSI A.10. 33-2011Scheduling work for safetyJob/safety hazard analysisSite-specific planningFall protection About the ExpertDaniel M. Paine, C.S.E., is a construction safety and fall protection expert. He is a Certified Safety Executive (C.S.E.) and a professional member of the American Society of Safety Engineers (A.S.S.E.), Past General Chairman of the Construction Division of the National Safety Council and a member of the Board of Directors of the Veterans of Safety. Mr. Paine is a frequent lecturer on the topic of worksite safety and fall protection. He co-authored the book entitled Elevated Work Platforms and Scaffolding Job Site Safety Manual (McGraw-Hill, 2004), and he has authored and produced articles and films addressing elevated worksite safety issues. Mr. Paine has been found qualified to testify as an expert witness in numerous court proceedings, and he has given expert testimony on the subject of worksite safety and fall protection. Mr. Paine has also testified as an expert for OSHA at the Public hearing for the adoption of 29 CFR §1926 Subpart R Steel Erection, which is the subject of this webinar. Previous Article Passenger Terminal Safety (Part 1) Next Article The Diabetic Foot – Reviewing the Medical Record Print